Air Line Scuba Tank Regulator Hose Assembly 100'

The Air Line Scuba Tank Regulator Hose is an alternative to normal scuba diver gear, for those times when you want to leave the scuba tank topside. The hose ends have standard fittings to connect to a 1st and 2nd stage scuba regulator. Hose without a regulator; use the 1st and 2nd stage from your own scuba regulator. Each scuba regulator hose includes a tow belt, so the diver can tow the hose from the waist. Also, includes a drawstring closure with barrel lock nylon storage bag. At the topside end, a 24" (61cm) 1st stage whip hose with the standard 3/8"-24 male fitting that connects to a low-pressure port on a scuba regulator 1st stage.

Hose is available in three lengths of 40', 60 and 100' (12.2m, 18.3m and 30.5m) lengths allow more range away from the boat, dock or pool deck. Hoses have a 3/8" ID down hose section withswiveled hose fittingsat both ends to prevent the hose from kinking. At the diver's end, a 38" (96.5cm) 2nd stage whip hose with a standard 9/16"-18 2nd stage regulator body fitting to attach a scuba regulator second stage. Tow belt that the scuba hose clips onto, so the diver is towing the hose from the back, waist area. Includes a hose retention strap. All scuba regulator hose fittings aresolid-brass, nickel-plated fittings.No plastic fittings here for strength and durability. Hose assembly does not include regulator first and second stages. For low-pressure air use only below 200 psi (13.8 bars).