Cressi Aquapro Plus Dive Package

- Cressi Aquapro + BCD -
The Aquapro + is a moderately minded jacket style BCD yet has all the features of higher priced buoyancy compensators. The durable 420-denier urethane laminated nylon and self-draining mesh fabric construction will give years of dependable service. The Aquapro + has two unique gravity ditch-able weight pockets that are attached to the zippered accessory pockets with one on either side of the BCD. The weight pockets closures are "squeeze style" quick-release impact and corrosion resistant Fastex buckles. Just squeeze the buckles and the weights are released. Each pocket can hold over 10 lbs (4.547kg).The back support is rigid for proper cylinder stability but is fully padded for comfort. The harness assembly is an independent suspension system that allows the cylinder and the diver to keep proper stability and avoid cylinder shifting on the back, while allowing the BCD's air cell to fully inflate away from the diver not causing restriction or crushing effect as with non-ergonomic designs. Adjustable sternum strap along with both torso adjustment shoulder straps are equipped with "squeeze style" quick-release buckles.

The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. BCD is equipped with two stainless steel, 2" (50mm), D-rings on the shoulder straps, and two techno-polymer plastic, 2" (50 mm) D-rings on the pocket lobes, with two additional snap hooks for attachment of Instruments and accessories. BCD comes in multiple sizes with lift capacities ranging from 16.9 lbs (7.7kg) to 36 lbs (16.3kg), is equipped with the Cressi's streamline Commando Power Inflator with cable activated pull dump valve and 3/8" threaded quick disconnect hose. Shoulder overpressure relief valve with pull cord is provided for trimming of buoyancy. The inflator mechanism is environmentally sealed for greater reliability and less maintenance.

- Cressi AC2/XS2 Regulator -
The XS2/AC2 Regulator is a reliable 1st stage regulator designed for non-balanced flow-by-piston use. It is a great choice for beginner divers or as a stage bottle regulator system. The 1st stage regulator is made of marine grade chromed brass which ensures durability and longevity. It has one high-pressure port and four low-pressure ports. The regulator features a conical filter with a larger surface area, providing better air flow characteristics.

The XS2 Compact Second-Stage housing is made of durable, non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece through injection, which creates a venturi effect, enhancing the performance of the regulator. Additionally, the 2nd stage comes with a flow deviator that adjusts the Venturi effect and has a dive/pre-dive adjustment function. The regulator is equipped with a comfortable silicone mouthpiece.

The XS2 Compact AC2 Regulator has a weight of 35 oz (994g) with the hose and comes with an owner's manual. The regulator is certified to EN250/2000 standards and is manufactured in Italy.

- Cressi XS Octopus -
The XS Octopus is a lightweight, high performance second stage regulator. The XS has a Venturi dive/pre-dive switch which will help control the sensitivity of the regulator when not in use, yet when switched from the pre-dive to dive position the regulators performance will instantly increase. A The XS Octopus has a dependable downstream demand valve mechanism for reliable performance. The XS Octopus is equipped with a 33" (84cm) 3/8" threaded hose, has a yellow front cover for easy identification in an out-of-air-emergency. The regulator has a soft and comfortable liquid silicone mouthpiece and the housing is made of durable impact resistant hi-tech polymers. The regulator weighs 7.27 oz (206g) without the hose and 12.7 oz (359g) with the hose. Regulator is certified to Annex B EN 250.2014 standards. Regulator is Italian made.

- Cressi Rugged Console DP2 -

Precision and Durability in One Compact Dive Console
The Cressi Rugged Console DP2, Imperial is engineered for divers who demand accurate pressure and depth readings in a tough, compact form. Designed with chrome-plated brass internals and a modern-shaped housing made from polycarbonate and Desmopan, this rugged scuba console delivers both performance and protection under pressure. Whether you're a recreational diver or a professional, the Cressi DP2 imperial console ensures critical information is always within view.

Clear Readings with Color-Coded Gauges
This dual gauge dive console features a high-visibility analog pressure gauge reading up to 5000 PSI and an imperial depth gauge rated to 230 feet. Both dials are color-coded (green, blue, red) for instant readability, with wide spacing in the first 40 feet for precise decompression stop monitoring. The Cressi DP2 scuba gear console uses a luminescent face and a maximum depth indicator that locks your deepest reading, ideal for dive logging and safety tracking.

Lightweight and Secure by Design
Despite its robust construction, the Cressi Rugged DP2 console remains ultra-light and compact. Two reinforced eyelets allow secure attachment to your BCD or harness, keeping the console tucked away and minimizing environmental snagging. The lens also acts as a pressure relief valve, enhancing safety during sudden pressure spikes. A 7/16" threaded high-pressure hose provides compatibility with most regulator systems.